Honed Concrete

Honed Concrete for surface slip safety.

Essentially, honed concrete mainly refers to the process of external polished concrete. However, we must emphasis we do not refer an externally honed surface as polished. Polished concrete is for internal floors only for surface slip safety.

Due to the non slip surface needed concrete honing grinds away the concrete surface. Aggregates are revealed during the course diamond grinding stage.

As a result of this course diamond tool grinding, we make the concrete surface a lot flatter. When we refer to flatter, we are saying water will flow better where the concrete already has a few degree of fall. We talk more on this when you get in get in touch.

honed concrete to external paths near pool area

Grinding concrete to a honed finish makes for a stunning alfresco outdoor areas. Is also ideal for outdoor entertainment and living areas as well. Also a perfect fit for areas around a pool. And finally, it is more cost effective then you think and maintenance is quite simple.

Do keep in mind, you will still  need to do some basic cleaning though. A good clean to the hone concrete every so often will help surface slip safety, especially when water wet.

 

Perfect solution for external concrete.

 

  • Alfresco areas
  • Paths
  • Balconies
  • Shop fronts
  • Pool surrounds
  • Council footpaths
  • Pool coping face
  • Outdoor Dining
  • Driveways
  • Precast Walls
  • Carports
  • Seating & benches
colour enhancing sealer concrete by Ultimate Floors

Colour Enhancing Sealer for Honed Concrete

Colour Enhancing Sealer or Natural Look Sealer For Outdoor Honed Concrete. Ultimate floors recently enhanced this Keppera family’s outdoor entertainment area.  Home owners, Adrian and Wendy originally selected a natural look impregnate sealer  finish. Concrete honing floor tech was asked how the finish will look. Simple answer to that is “Natural”. The concrete patina will …

Colour Enhancing Sealer for Honed Concrete Read More »

External Honed Concrete

Honed Concrete refers to the level of surface refinement or surface texture created by cutting back the concrete top layer with purpose designed floor resurfacing equipment using a selection of metal bonded diamond abrasive. Quite often called polished concrete, grind and seal and external polished concrete by mistake, we will take this opportunity to clarify the points of difference – Honed Concrete has 2 or 3 refinement levels compared with 8, 10 or 12 refinement levels for Polished Concrete.

Honed or Polished Samples Range > Hy-Tec Concrete

Previous Next Honed or Polished Concrete Samples by Hy-Tec Concrete As polishing contractors we see a vast amount of Architectural concrete blends and can say the quality of polish that Hy-tec Honed or Polished Concrete range for South East brings out the inner beauty and depth of the aggregates. To find more about the supplier, …

Honed or Polished Samples Range > Hy-Tec Concrete Read More »

Scroll to Top