Epoxy flooring • Flake • Solid colour • Polyaspartic
Commercial Epoxy Flooring Contractors
Professionally installed epoxy floor coatings for garages, workshops, warehouses and commercial spaces across South East Queensland.
We install epoxy flooring systems, flake floors, solid colour coatings, quartz broadcast and fast cure same-day return to service polyaspartic finishes. Diamond ground preparation on every job, no acid washing, no shortcuts. Moreton Bay to regional Queensland.
- Flake Flooring
- Solid Colour Epoxy
- Quartz Broadcast
- Garages & Workshops
- Patios & Pools
- Commercial & Industrial
Australian Suppliers and Manufacturers
Driveways · Patios · Pool Surrounds
Offices · Cafés · Living Areas · Garages
Latest Chemistry · Low Odours · Low VOC
Residential, Commercial & Industrial Resin Flooring Systems
Flake Epoxy Flooring
Decorative acrylic flake chips broadcast into epoxy for a seamless, slip-resistant finish. Choose from Standard Flake, Stone Flake or Quartz Anti-Slip — 100+ colour blends for garages, patios, pool surrounds and commercial floors.
Explore Flake Flooring →Clear Epoxy & Polyurethane
Protect and enhance concrete that's already in good condition — clear coatings won't hide repairs, patches or uneven surfaces. UV-stable polyurethane and polyaspartic topcoat options for areas exposed to sunlight.
Grind & Seal Options →Solid Colour Epoxy
Roller coat, hi-build and trowel-down epoxy systems in a full range of colours. From 2–3 coat roller applications for general protection through to high-build broadcast and trowel-down systems for heavy-duty workshops, warehouses and industrial floors.
Cost Calculator →Speciality Epoxy & Polyurethane Are an Integral Part of Concrete Repairs
Drag the slider to see the difference proper preparation makes
After
Garage Epoxy Resurfacing
Heavy grinding + crack repairs → UV-stable epoxy finish
Anti-Slip Quartz Walkway
Shot-blasted concrete → quartz anti-slip resurfacing
Entertaining Area Flake Floor
Damaged concrete → blue stone flake with UV-stable topcoat
Drag or swipe the handle to compare
Expertly Installed Epoxy Floor Coatings — Prepared Properly, Built to Perform
We install epoxy flooring systems — we don't sell DIY kits or supply-only coatings. Every epoxy floor coating Ultimate Floors installs starts with professional concrete preparation and QA checks before any resin goes down.
We diamond grind or shot blast every surface to a specified concrete surface profile (CSP 3–5) to create a mechanical bond between the resin and your concrete. No acid washing. No shortcuts.
This is where most concrete floor coatings fail — and where we set ourselves apart.
We check moisture levels, pH and alkalinity before a drop of resin goes down. Cracks are filled, divots repaired and surface contamination removed. These QA checks aren't optional — if the structural concrete moisture or pH exceeds maximum allowable levels, the coating will fail regardless of the resin used. Whether it's a single garage floor coating in Moreton Bay or a 2,000 m² warehouse epoxy flooring project in Brendale, the preparation standard doesn't change.
Preparation & QA Standards (Every Job)
- Diamond grinding or shot blasting to specified CSP 3–5
- Moisture assessment and mitigation pathway if required
- pH and alkalinity checks before coating
- Crack, joint and divot repairs before coating build
- Contamination removal (oils, old coatings, adhesives)
- Primer selection matched to slab condition and resin system
Garage Floor Epoxy & Patio Flake Flooring
Garage floor epoxy is our most requested residential service. A properly prepared garage epoxy floor gives you a seamless, easy-clean surface that handles hot tyres, oil, chemical spills and Queensland's subtropical weather without peeling or yellowing.
Our epoxy flake flooring system broadcasts decorative acrylic chips into the resin for a textured, anti-slip finish with natural grip — ideal for garages, carports and driveways. We install three flake systems:
- Standard Flake — classic multi-chip look, 100+ colour blends
- Stone Flake — dense terrazzo-style finish for a premium look
- Quartz Anti-Slip — external wet areas, pool surrounds, paths
For outdoor areas, patio flake flooring uses the same chip-broadcast system with UV-stable topcoats and non-slip finishes rated to AS 4586:2013 (P3–P5) — designed for paths, pool surrounds and alfresco entertaining areas exposed to weather and foot traffic.
We also install clear and solid colour epoxy for internal living areas, laundries and home workshops where a clean, single-tone floor is the priority. Choose from over 100 colour blends in our Visualiser tool, or let us create a custom mix to suit your home.
Workshop Epoxy Floors & Industrial Epoxy Flooring
A workshop epoxy floor needs to do more than look good — it needs to resist impacts, abrasion, oil and solvent exposure day after day. We specify resin systems matched to the demands of your work environment, from home workshops and sheds through to full-scale industrial epoxy flooring for factories, processing facilities and aircraft hangars.
The right system depends on how the floor is used. A 2–3 coat roller-applied epoxy suits general workshops and shop floors where the main concern is dust sealing, chemical resistance and easy cleaning. Where impact resistance and heavy traffic are a factor — forklift operations, heavy vehicle workshops, engineering bays — a high-build system with aluminium oxide broadcast or a trowel-down application delivers greater film thickness (800–2000 μm DFT) and mechanical durability.
For environments with aggressive chemical exposure — bund containment areas, battery rooms, chemical storage — we specify novolac epoxy systems with superior acid and solvent resistance. Food-grade epoxy systems for commercial kitchens, bakeries and food processing facilities are installed to meet hygiene and slip-resistance compliance. Edge coving and epoxy skirting systems provide fully sealed, hygienic junctions between floor and wall — eliminating harbourage points for bacteria and making wash-down maintenance straightforward. For environments requiring chemical bund protection or acid-resistant flooring, we work with high-performance resin systems specified for long-term asset protection.
Our commercial epoxy flooring installations cover retail fit-outs, medical clinics, early learning centres, amenities blocks, automotive workshops, car parks, distribution centres and large-format warehousing. Systems are specified to Australian standards including slip resistance ratings (P2–P5 per AS 4586:2013) and APAS-approved coatings where required.
Warehouse epoxy floors get the same preparation-first treatment — mechanical grinding across the full slab, moisture testing, crack repair and a resin system specified for forklift traffic, pallet racking and high-volume foot traffic. We've completed warehouse and industrial floor coating projects across South East Queensland including power stations, aviation workshops and large-scale distribution facilities.
UV Protection & Polyurethane Topcoat Systems
Many epoxy coatings yellow and chalk when exposed to UV — particularly imported products not formulated for Australian conditions. We specify UV-tested resin systems and pair every external or sunlight-exposed installation with a polyurethane or polyaspartic topcoat.
The topcoat acts as a protection barrier over the epoxy base. It takes the UV exposure and daily wear so the coating underneath doesn't have to — extending the life of the entire floor system by years. Available in gloss or satin finishes, with fast-cure polyaspartic options for commercial environments that need rapid return to service. Adding a polyurethane topcoat to any epoxy system is the single most effective way to protect your investment against Queensland's harsh UV conditions.
Epoxy Floor Coating Systems We Install
Ultimate Floors works with a range of Australian-supplied resin systems to match your floor's use, your timeline and your budget:
- 100% solids epoxyMaximum film build per coat, maximum durability, low odour during application.
- Novolac epoxyHigh chemical and acid resistance for bunds, workshops and harsh chemical environments.
- Water-based epoxyLow VOC, low odour — suitable for hospitals, schools, aged care and occupied spaces.
- Polyaspartic coatingsFast cure (4–6 hour recoat) for rapid return to service in commercial fit-outs.
- Polyurea systemsFlexible, chemical resistant, rapid turnaround for time-critical projects.
- Polyurethane topcoatsUV-stable protection layer over epoxy base — gloss or satin finish.
- Solvent-based epoxyDeep penetration into dense or contaminated concrete where water-based systems won't bond.
- Moisture-cure polyurethaneSingle component clear system for slabs with residual moisture.
We don't lock you into one product or one supplier. We specify the right epoxy floor coating system for the job — whether that's a garage floor epoxy for a single bay residential garage, a food-grade system for a commercial kitchen, or a chemical resistant epoxy across a multi-zone industrial facility. Every system is installed by our own team — we don't subcontract your floor to someone else.
Learn more about concrete floor preparation → | Epoxy flooring cost calculator →
Epoxy Floor Coating & Polyurethane Flooring Systems
Every system is specified layer by layer with target film thickness for each coat.
2-Coat Roller System
Light Duty(Dry Film Thickness)200 - 300 µm
3-Coat Roller System
General Purpose(Dry Film Thickness)310 - 450 µm
Hi-Build / Broadcast System
Heavy Duty(Dry Film Thickness)880 - 1200 µm
Trowel Down - Epoxy Crete / PU Crete
Industrial(Dry Film Thickness)1,210 - 2,250 µm
Flake Flooring System
Residential & Commercial(Dry Film Thickness)430 - 720 µm
Quartz Flooring System
Commercial & Decorative(Dry Film Thickness)920 - 1100 µm
Epoxy Floor Colour Visualiser
See how any AS-2700 solid colour looks in your workshop - heavy duty industrial floor space for your floor upgrade investment — upload a photo of your commercial floor.
Launch Floor Visualiser →Where We Install Residential & Commercial Epoxy Flooring Systems
Flake floors, solid colour coatings and clear epoxy systems — from Moreton Bay to regional Queensland. Select your region or open the map to check minimum project sizes.
Click to check your region and see eligibility requirements
How to use this map:
- Click any region to see epoxy services available and minimum job sizes
- Different colours indicate different service zones and rates
- Hold Alt/Option + Click to zoom into a specific region
Our Suppliers
Brands We Trust
Why Preparation Makes or Breaks an Epoxy Floor
An epoxy floor is only as good as what's underneath it. Every resin system — flake, solid colour, clear coat or hi-build — requires a concrete surface that has been mechanically prepared to the correct profile before a single drop of primer goes down.
We diamond grind or shot blast every slab to remove laitance, old coatings, contaminants and high spots, then refine the surface to a uniform Concrete Surface Profile (typically CSP 2–4) matched to the resin system being installed. Moisture testing, crack repair and contamination removal are completed before coating begins — not discovered halfway through the job.
This is the step most applicators rush or skip entirely. It's the single biggest reason epoxy floors peel, blister and delaminate within months. We don't acid wash. We don't cut corners. We prepare every floor as though we're installing over it ourselves — because we are.
Why Choose Ultimate Floors for Epoxy
Based in the City of Moreton Bayand backed by 40+ years in the flooring industry, we install every epoxy floor ourselves. No subcontractors, no franchise operators. You deal directly with the flooring contractor who prepares and coats your floor, not a project manager passing the job to a third party. From a single garage in Caboolture to a 2,000 m² warehouse in Brendale, the preparation standard and coating quality doesn't change..
We specify the resin system to suit how your floor is used, the concrete condition and your budget, not the other way around. That means you get afit-for-purpose installation that performs long term, not just a product pushed to make the sale.
What Sets Us Apart
- Preparation-first approach Diamond grinding and shot blasting to ICRI CSP standards on every project — no acid washing.
- Installers, not just applicators We prepare and coat — same team, same accountability, same quality standard.
- Fit-for-purpose resin selection 100% solids, water-based, polyaspartic, polyurea and polyurethane systems specified to suit the job.
- Trade-qualified specialists Nationally recognised qualifications and 40+ years of hands-on flooring experience.
- QBCC licensed Fully licensed and insured under QBCC Floor Finishing – Hard Sector.
- Australian standards tested Slip resistance rated to AS 4586:2013, APAS-approved coatings, low VOC systems certified for indoor air quality.
- Residential & commercial Garage flake floors through to warehouse epoxy — same preparation standard, every time.
QBCC (Floor Finishing – Hard Sector) 1115416 • 40+ years in flooring • Epoxy installations across Moreton Bay, Brisbane North, Sunshine Coast & Somerset.
EPOXY FLOORING FAQ'S
Epoxy Flooring — Frequently Asked Questions
How much does epoxy flooring cost?
What's the difference between flake epoxy and solid colour epoxy?
Is epoxy flooring suitable for workshops and industrial sheds?
Can epoxy floor coatings be applied outdoors?
How long does a garage floor epoxy last?
Why don't you acid wash concrete before coating?
How long before I can drive on my new garage floor coating?
Do you install warehouse and commercial epoxy flooring?
Ready to Start Your Epoxy Flooring Project?
Talk directly with the flooring contractor who will be coating your floor. We'll assess your concrete, explain realistic options and provide a clear quote for your project.